What is a Denitrification of flue gas from forging heating furnace? Introduction to the advantages, characteristics, and principles of the SCR denitration

Denitrification of flue gas from forging heating furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，the product looks beautiful.。

1、Brief introduction of Denitrification of flue gas from forging heating furnace

Denitrification of flue gas from forging heating furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，at runtime,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，It has a wide range of uses, and is often used inMeet the requirements of environmental protection,Promote sustainable development,environmental protection,Promote sustainable development,Flue gas denitrification and so on，it is widely used in iron and steel plant, cement plant, building materials, coal-fired power station and Gas power plant，it is an ideal choice for customers to buy Denitrification of flue gas from forging heating furnace。

Denitrification of flue gas from forging heating furnace

2、Working principle of Denitrification of flue gas from forging heating furnace

Denitrification of flue gas from forging heating furnaceat work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，It is a product series that integrates Meet the requirements of environmental protection, Improve product quality, Improve product quality, Promote sustainable development and environmental protection，has been favored by more and more customers.。

Denitrification of flue gas from forging heating furnace

3、Denitrification of flue gas from forging heating furnace field real shot

High-definition pictures for various Denitrification of flue gas from forging heating furnace, panoramic display,the product looks atmospheric., reliable in quality and trustworthy.。

Denitrification of flue gas from forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Denitrification of flue gas from forging heating furnace characteristics

The Denitrification of flue gas from forging heating furnace features are as follows:

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

3. Environmental protection

The final products of Denitrification of flue gas from forging heating furnace technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

4. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

5. Small secondary pollution

The by-products produced in the Denitrification of flue gas from forging heating furnace opening process are nitrogen and water vapor, and there is no secondary pollution problem.

Denitrification of flue gas from forging heating furnace

5、Denitrification of flue gas from forging heating furnace advantage

The advantages of Denitrification of flue gas from forging heating furnace are as follows:

1. Intelligent control and convenience of operation

The Denitrification of flue gas from forging heating furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of flue gas from forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Denitrification of flue gas from forging heating furnace technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from forging heating furnace technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from forging heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from forging heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas from forging heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Intelligent control and convenience of operation

The Denitrification of flue gas from forging heating furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of flue gas from forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

Denitrification of flue gas from forging heating furnace

6、Denitrification of flue gas from forging heating furnace structure

The Denitrification of flue gas from forging heating furnace structure is introduced as follows:

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

4. Reactor

It is the core component of Denitrification of flue gas from forging heating furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

5. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

Denitrification of flue gas from forging heating furnace

Denitrification of flue gas from forging heating furnaceAmmonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，is a common Denitrification of flue gas from forging heating furnace，Structure consists of Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system, Catalyst reactor, control system and so on。