Introduction to Flue gas denitrification equipment inside the furnace and SCR flue gas denitrification advantages and features

Flue gas denitrification equipment inside the furnacethe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，be loved by our customers.。

1、Brief introduction of Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，it is mainly composed of control system, Catalyst reactor, Temperature control and monitoring system, Flue gas mixing and distribution system and Catalyst supply system，Flue gas denitrification equipment inside the furnaceThe structural design is more advanced and reasonable.，Widely used inenvironmental protection,environmental protection,Improve product quality,Promote sustainable development,Flue gas denitrification and so on。

Flue gas denitrification equipment inside the furnace

2、Flue gas denitrification equipment inside the furnace principle

Flue gas denitrification equipment inside the furnacein the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，usually used in cement plant, coal-fired power station, iron and steel plant, coal-fired power station, Gas power plant and other fields，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.。

Flue gas denitrification equipment inside the furnace

3、Flue gas denitrification equipment inside the furnace performance advantage

The advantages of Flue gas denitrification equipment inside the furnace are as follows:

1. Environmental friendliness

The by-products produced by Flue gas denitrification equipment inside the furnace technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

2. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification equipment inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

3. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Flue gas denitrification equipment inside the furnace technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification equipment inside the furnace technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

4. Intelligent control and convenience of operation

The Flue gas denitrification equipment inside the furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. Mature and stable technology

Flue gas denitrification equipment inside the furnace technology has been developed and applied for many years, and the technology is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

Flue gas denitrification equipment inside the furnace

4、Flue gas denitrification equipment inside the furnace HD real picture

Provide high-definition Flue gas denitrification equipment inside the furnace real shot, a variety of specifications and models for customers to visit.。

Flue gas denitrification equipment inside the furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Flue gas denitrification equipment inside the furnace use

Flue gas denitrification equipment inside the furnaceIt has the functions of Meet the requirements of environmental protection, environmental protection, Improve product quality, Flue gas denitrification and Promote sustainable development，is a Flue gas denitrification equipment inside the furnace，delective catalytic reduction technology is an efficient flue gas denitrification technology.。

Flue gas denitrification equipment inside the furnace

6、company introduction

One-combustion energy saving is a professional manufacturer of SCR flue gas denitrification, which produces Flue gas denitrification equipment inside the furnace with The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification equipment inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification equipment inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification equipment inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification equipment inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification equipment inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Flue gas denitrification equipment inside the furnacewidely used inmetallurgy,building materials,metallurgy,Gas power plant,iron and steel plant and other industries，It is a product series that integrates Meet the requirements of environmental protection, environmental protection, Improve product quality, Meet the requirements of environmental protection and Flue gas denitrification。