Introduction of Stick type quenching and tempering heat treatment furnace

Stick type quenching and tempering heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used in pharmacy, electron, material, Household necessities, metallurgy and other fields，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the product looks atmospheric.，the product looks atmospheric.。

1、Brief introduction of Stick type quenching and tempering heat treatment furnace

Stick type quenching and tempering heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Stick type quenching and tempering heat treatment furnace

2、Stick type quenching and tempering heat treatment furnace function

Stick type quenching and tempering heat treatment furnacemultifunctional, with functions such as normalizing, quench, hardening and tempering, heat treatment and anneal，it is an ideal choice for customers to buy Stick type quenching and tempering heat treatment furnace。

Stick type quenching and tempering heat treatment furnace

3、Stick type quenching and tempering heat treatment furnace advantage

The advantages of Stick type quenching and tempering heat treatment furnace are as follows:

1. Improve product quality

Because the Stick type quenching and tempering heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Efficient combustion

The Stick type quenching and tempering heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. easy to operate

The operation interface of the Stick type quenching and tempering heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Extend the service life of equipment

The Stick type quenching and tempering heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The Stick type quenching and tempering heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Stick type quenching and tempering heat treatment furnace

4、Structural advantages of Stick type quenching and tempering heat treatment furnace

The Stick type quenching and tempering heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Stick type quenching and tempering heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Stick type quenching and tempering heat treatment furnace

5、Introduction of Stick type quenching and tempering heat treatment furnace characteristics

Stick type quenching and tempering heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Stick type quenching and tempering heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Stick type quenching and tempering heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Stick type quenching and tempering heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Efficient heating

The Stick type quenching and tempering heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Stick type quenching and tempering heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Stick type quenching and tempering heat treatment furnace

6、Stick type quenching and tempering heat treatment furnace function

Stick type quenching and tempering heat treatment furnaceit has the functions of Casting heating, Forging heating, temper, heat treatment and Forging heating。

Stick type quenching and tempering heat treatment furnace

Stick type quenching and tempering heat treatment furnacethe main features are Easy to maintain, Stable and reliable, energy saving and environmental protection, Strong adaptability and Stable and reliable，Widely used in Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Metal melting and casting and Energy conservation and environmental protection。