Introduction of Energy saving and environmentally friendly roller bottom furnace

Energy saving and environmentally friendly roller bottom furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Energy saving and environmentally friendly roller bottom furnace

Energy saving and environmentally friendly roller bottom furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the characteristics of energy saving and environmental protection, energy-efficient, energy saving and environmental protection, Easy to control and Stable and reliable，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a Energy saving and environmentally friendly roller bottom furnace，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Energy saving and environmentally friendly roller bottom furnace

2、Structural advantages of Energy saving and environmentally friendly roller bottom furnace

The Energy saving and environmentally friendly roller bottom furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly roller bottom furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Energy saving and environmentally friendly roller bottom furnace

3、Energy saving and environmentally friendly roller bottom furnace function

Energy saving and environmentally friendly roller bottom furnaceit has the functions of normalizing, quench, quench, Casting heating and normalizing，support customization。

Energy saving and environmentally friendly roller bottom furnace

4、Energy saving and environmentally friendly roller bottom furnace advantage

The advantages of Energy saving and environmentally friendly roller bottom furnace are as follows:

1. Improve product quality

Because the Energy saving and environmentally friendly roller bottom furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Energy saving and environmentally friendly roller bottom furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Improve product quality

Because the Energy saving and environmentally friendly roller bottom furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. easy to operate

The operation interface of the Energy saving and environmentally friendly roller bottom furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Extend the service life of equipment

The Energy saving and environmentally friendly roller bottom furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Energy saving and environmentally friendly roller bottom furnace

5、Energy saving and environmentally friendly roller bottom furnace function

Energy saving and environmentally friendly roller bottom furnacemultifunctional, with functions such as heat treatment, temper, hardening and tempering, Forging heating and anneal，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，is a kind of high quality and low price Energy saving and environmentally friendly roller bottom furnace，widely used inpetroleum,electron,surface treatment,material,chemical industry and other industries，can be customized according to user's needs.。

Energy saving and environmentally friendly roller bottom furnace

6、Introduction of One-combustion energy saving Company

One-combustion energy saving is a professional manufacturer of hearth, which produces Energy saving and environmentally friendly roller bottom furnace with the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Energy saving and environmentally friendly roller bottom furnaceis a common Energy saving and environmentally friendly roller bottom furnace，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。