Introduction and advantages of Rotary bottom continuous heating furnace

Rotary bottom continuous heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，be loved by our customers.。The following is to introduce the Rotary bottom continuous heating furnace:

1、Brief introduction of Rotary bottom continuous heating furnace

Rotary bottom continuous heating furnaceIt is a forging heating device using gas as fuel.，it is widely used in metallurgy, petroleum, light industry, aerospace and pharmacy，the product looks beautiful.，it is mainly composed of ventilation system, ventilation system, recovery of waste heat, Radiation chamber and convection chamber，is based on One-combustion energy saving is a Rotary bottom continuous heating furnace newly developed by One-combustion energy saving。

Rotary bottom continuous heating furnace

2、Rotary bottom continuous heating furnace HD real shot

Speak directly with facts on the spot。

Rotary bottom continuous heating furnace

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, and is often used inMetal tempering,Metal melting and casting,Energy conservation and environmental protection,Metal heat treatment,Metal heat treatment and so on。

3、Structural characteristics of Rotary bottom continuous heating furnace

The Rotary bottom continuous heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Rotary bottom continuous heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Rotary bottom continuous heating furnace

4、Rotary bottom continuous heating furnace use

The purpose of Rotary bottom continuous heating furnace is introduced as follows:

1. Metal forging heating

The Rotary bottom continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Rotary bottom continuous heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary bottom continuous heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Rotary bottom continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary bottom continuous heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Rotary bottom continuous heating furnace

5、Rotary bottom continuous heating furnace use

The purpose of Rotary bottom continuous heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Rotary bottom continuous heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Rotary bottom continuous heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Rotary bottom continuous heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Rotary bottom continuous heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Rotary bottom continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Rotary bottom continuous heating furnace

6、Rotary bottom continuous heating furnace characteristics

The Rotary bottom continuous heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Rotary bottom continuous heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Rotary bottom continuous heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Rotary bottom continuous heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Strong adaptability

The Rotary bottom continuous heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Strong adaptability

The Rotary bottom continuous heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Rotary bottom continuous heating furnace

Rotary bottom continuous heating furnaceEfficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，Simple structure and reliable operation.，generally, it is composed of combustor, Radiation chamber, recovery of waste heat, combustor, ventilation system and other major components，the product looks atmospheric.。