Introduction of Fully automatic industrial furnace

Fully automatic industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Fully automatic industrial furnace

Fully automatic industrial furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, including Metal melting and casting, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and Metal forging heating，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，modern technology。

Fully automatic industrial furnace

2、Video analysis of Fully automatic industrial furnace

You can buy Fully automatic industrial furnace according to your needs and show you Fully automatic industrial furnace videos.。

Fully automatic industrial furnace

As you can see from the live video.，One-combustion energy saving it has the structure of ventilation system, recovery of waste heat, Radiation chamber, Radiation chamber and ventilation system。

3、Fully automatic industrial furnace performance advantage

Fully automatic industrial furnaces have the following advantages.

1. Multiple fuel options

Although the Fully automatic industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Improve product quality

Because the Fully automatic industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Uniform heating

The Fully automatic industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Efficient combustion

The Fully automatic industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Fully automatic industrial furnace

4、Fully automatic industrial furnace application

Fully automatic industrial furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Fully automatic industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Fully automatic industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Fully automatic industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Fully automatic industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The Fully automatic industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Fully automatic industrial furnace

5、Fully automatic industrial furnace HD picture real shot

The design of One-combustion energy saving Fully automatic industrial furnace is exquisite and elegant. Here are the high-definition pictures of One-combustion energy saving's factory products for our customers' reference. We need to make an appointment to visit the factory in advance for physical inspection.。

Fully automatic industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Fully automatic industrial furnace quotation

The Fully automatic industrial furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. quality

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Fully automatic industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Fully automatic industrial furnace price can meet the purchasing needs of customers.

4. market supply and demand

In order to build their own brands, some manufacturers deliberately reduce the price of Fully automatic industrial furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

5. Different regions

Different provinces and regions have different consumption levels, different market positioning and different prices.

Fully automatic industrial furnace

Fully automatic industrial furnacethe advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。