What is a End in end out heating furnace? Introduction to the Working Principle of heating furnace

End in end out heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price End in end out heating furnace，It has the functions of Metal tempering, Metal melting and casting, Metal forging heating, Metal heat treatment and Metal tempering，It has a wide range of uses, and is often used inMetal heat treatment,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal melting and casting and so on，be of high quality。

1、Brief introduction of End in end out heating furnace

End in end out heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，energy-efficient,Strong adaptability,energy saving and environmental protection,Easy to maintain,Stable and reliable，is a popular End in end out heating furnace，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it is widely used inpharmacy,material,surface treatment,Household necessities,light industry and other industries。

End in end out heating furnace

2、End in end out heating furnace advantage

The advantages of End in end out heating furnace are as follows:

1. easy to operate

The operation interface of the End in end out heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Intelligent control

The End in end out heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the End in end out heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Uniform heating

The End in end out heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the End in end out heating furnace can significantly reduce energy consumption, thus reducing operating costs.

End in end out heating furnace

3、End in end out heating furnace video live broadcast

On-site aerial photography of End in end out heating furnace。

End in end out heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of temper, heat treatment, normalizing, quench and temper。

4、End in end out heating furnace characteristics

The End in end out heating furnace features are as follows:

1. Stable and reliable

The End in end out heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the End in end out heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The End in end out heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The End in end out heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

End in end out heating furnace

5、Structural characteristics of End in end out heating furnace

The End in end out heating furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for End in end out heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

End in end out heating furnace

6、End in end out heating furnace introduction video

Speak directly with facts on the spot。

End in end out heating furnace

As you can see from the live video.，One-combustion energy saving at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

End in end out heating furnaceit has been widely used in shipping, metallurgy, electron, petroleum, building materials and other industries，features include Easy to maintain, energy saving and environmental protection, Strong adaptability, energy-efficient and Easy to control。