What is a Quenching heat treatment heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Quenching heat treatment heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of furnace chamber, recovery of waste heat, ventilation system, ventilation system and ventilation system，the product looks beautiful.。The following is to introduce the Quenching heat treatment heating furnace:

1、Brief introduction of Quenching heat treatment heating furnace

Quenching heat treatment heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used in Household necessities, petroleum, surface treatment, building materials and machinery，it mainly includes Radiation chamber, combustor, convection chamber, recovery of waste heat and furnace chamber，Quenching heat treatment heating furnaceThe overall structural design is simple and novel.，modern technology。

Quenching heat treatment heating furnace

2、Quenching heat treatment heating furnace customer scene picture

Overview of high-definition pictures,the product looks atmospheric.。

Quenching heat treatment heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Advantages of Quenching heat treatment heating furnace principle

Quenching heat treatment heating furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the characteristics of Stable and reliable, Strong adaptability, Easy to maintain, energy-efficient and Strong adaptability，Structure consists of convection chamber, recovery of waste heat, ventilation system, combustor, furnace chamber and so on，Quenching heat treatment heating furnaceThe overall structural design is relatively simple，features include energy-efficient, Stable and reliable, Easy to control, Easy to maintain and energy saving and environmental protection，multifunctional, with functions such as temper, heat treatment, normalizing, Casting heating and hardening and tempering。

Quenching heat treatment heating furnace

4、Quenching heat treatment heating furnace advantage

The advantages of Quenching heat treatment heating furnace are as follows:

1. easy to operate

The operation interface of the Quenching heat treatment heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Uniform heating

The Quenching heat treatment heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Quenching heat treatment heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Quenching heat treatment heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Quenching heat treatment heating furnace

5、Structural advantages of Quenching heat treatment heating furnace

The Quenching heat treatment heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Quenching heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Quenching heat treatment heating furnace

Quenching heat treatment heating furnacethe main features are energy saving and environmental protection, Stable and reliable, energy-efficient, energy saving and environmental protection and Easy to control，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，widely used inautomobile,electron,shipping,aerospace,Machinery manufacturing and other industries。