Introduction to Forge furnace flue gas denitrification equipment, how much is the price of the SCR denitration system?

Forge furnace flue gas denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，was developed and designed by One-combustion energy saving。The following is to introduce the Forge furnace flue gas denitrification equipment:

1、Brief introduction of Forge furnace flue gas denitrification equipment

Forge furnace flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，features include Less secondary pollution, Good selectivity, energy saving and environmental protection, Promote sustainable development and Economically feasible，structure mainly includes: Flue gas mixing and distribution system, Catalyst reactor, Temperature control and monitoring system, control system, Catalyst supply system and so on。

Forge furnace flue gas denitrification equipment

2、Functional advantages of Forge furnace flue gas denitrification equipment

Forge furnace flue gas denitrification equipments have the following advantages.

1. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Forge furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Forge furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Forge furnace flue gas denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Forge furnace flue gas denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. Environmental friendliness

The by-products produced by Forge furnace flue gas denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Forge furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

4. Intelligent control and convenience of operation

The Forge furnace flue gas denitrification equipment has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Forge furnace flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Forge furnace flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

Forge furnace flue gas denitrification equipment

3、Structural characteristics of Forge furnace flue gas denitrification equipment

The Forge furnace flue gas denitrification equipment has the following structure

1. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

2. control system

The whole Forge furnace flue gas denitrification equipment is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

3. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

4. Reactor

It is the core component of Forge furnace flue gas denitrification equipment technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Forge furnace flue gas denitrification equipment

4、Forge furnace flue gas denitrification equipment explanation video

On-site aerial photography of Forge furnace flue gas denitrification equipment。

Forge furnace flue gas denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd delective catalytic reduction technology is an efficient flue gas denitrification technology.。

5、How much is the Forge furnace flue gas denitrification equipment?

The Forge furnace flue gas denitrification equipment price is introduced as follows:

1. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. Manufacturer's strength

The nature of the manufacturer can also greatly affect the price of the Forge furnace flue gas denitrification equipment. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. quality factor

Quality is an important and fundamental factor that affects the price of Forge furnace flue gas denitrification equipment. In the final analysis, its price depends on its quality. Usually, Forge furnace flue gas denitrification equipment with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Forge furnace flue gas denitrification equipment with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

4. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. market factors

With the increasingly fierce competition of Forge furnace flue gas denitrification equipment, market factors have a certain influence on the price of Forge furnace flue gas denitrification equipment. When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

Forge furnace flue gas denitrification equipment

6、Company preferential activities

Forge furnace flue gas denitrification equipment is a new type of SCR denitration system introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for coal-fired power station and other industries. Now consult One-combustion energy savingProduction and processing的Forge furnace flue gas denitrification equipment, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Forge furnace flue gas denitrification equipmentit has the structure of Flue gas mixing and distribution system, Catalyst reactor, control system, Temperature control and monitoring system and Catalyst supply system，Widely used in environmental protection, Improve product quality, Improve product quality, Meet the requirements of environmental protection and Promote sustainable development，Technology has been developed and applied for many years, and it is mature and stable. The Forge furnace flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Forge furnace flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Forge furnace flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Forge furnace flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Forge furnace flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Forge furnace flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Forge furnace flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.。