Introduction to Isothermal normalizing furnace, Forging furnace advantages, characteristics and principles

Isothermal normalizing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Cheap and high quality。

1、Brief introduction of Isothermal normalizing furnace

Isothermal normalizing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Isothermal normalizing furnace，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，has been favored by more and more customers.。

Isothermal normalizing furnace

2、Isothermal normalizing furnace performance advantage

The advantages of Isothermal normalizing furnace are as follows:

1. Uniform heating

The Isothermal normalizing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. easy to operate

The operation interface of the Isothermal normalizing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Intelligent control

The Isothermal normalizing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Improve product quality

Because the Isothermal normalizing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Isothermal normalizing furnace

3、Isothermal normalizing furnace use

The purpose of Isothermal normalizing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Isothermal normalizing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Isothermal normalizing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Isothermal normalizing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Isothermal normalizing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Isothermal normalizing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Isothermal normalizing furnace

4、Isothermal normalizing furnace function

Isothermal normalizing furnaceit has the functions of temper, hardening and tempering, quench, Forging heating and anneal。

Isothermal normalizing furnace

5、Isothermal normalizing furnace characteristics

The Isothermal normalizing furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Isothermal normalizing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Isothermal normalizing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Isothermal normalizing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Efficient heating

The Isothermal normalizing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Isothermal normalizing furnace

6、Introduction of Isothermal normalizing furnace characteristics

Isothermal normalizing furnace has the following characteristics

1. Easy to maintain

The structural design of the Isothermal normalizing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Isothermal normalizing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Strong adaptability

The Isothermal normalizing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The Isothermal normalizing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Isothermal normalizing furnace

Isothermal normalizing furnaceIt can be used for Metal heat treatment, Metal tempering, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal forging heating and so on，multifunctional, with functions such as Casting heating, normalizing, anneal, Casting heating and temper。