What is a Regenerative gas tube furnace? Introduction to the advantages and characteristics of Forging furnace functions

Regenerative gas tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

1、Brief introduction of Regenerative gas tube furnace

Regenerative gas tube furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Strong adaptability,Easy to control,Stable and reliable,energy saving and environmental protection,Strong adaptability，has been favored by more and more customers.。

Regenerative gas tube furnace

2、Regenerative gas tube furnace characteristics

The Regenerative gas tube furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative gas tube furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Regenerative gas tube furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Regenerative gas tube furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Regenerative gas tube furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Regenerative gas tube furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Regenerative gas tube furnace

3、Regenerative gas tube furnace use

The purpose of Regenerative gas tube furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Regenerative gas tube furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Regenerative gas tube furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Regenerative gas tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas tube furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative gas tube furnace

4、Regenerative gas tube furnace advantage

The advantages of Regenerative gas tube furnace are as follows:

1. Wide application range

The Regenerative gas tube furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Intelligent control

The Regenerative gas tube furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Multiple fuel options

Although the Regenerative gas tube furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Extend the service life of equipment

The Regenerative gas tube furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative gas tube furnace can significantly reduce energy consumption, thus reducing operating costs.

Regenerative gas tube furnace

5、Regenerative gas tube furnace work site real shot

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for One-combustion energy saving's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from One-combustion energy saving.。

Regenerative gas tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Regenerative gas tube furnace price concessions

The Regenerative gas tube furnace price is introduced as follows:

1. geographical position

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

3. Manufacturer's strength

Our factory is a direct selling manufacturer of Regenerative gas tube furnace, with independent production and processing facilities, few circulation links and low circulation cost.

4. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Regenerative gas tube furnace will also conform to this market law.

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative gas tube furnace price and service can meet the actual needs of customers.

Regenerative gas tube furnace

Regenerative gas tube furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of temper, anneal, normalizing, temper and anneal。