Introduction to Stepping forging furnace, Forging furnace specifications, model parameters

Stepping forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used inshipping,Machinery manufacturing,building materials,surface treatment,pharmacy and other industries。The following is to introduce the Stepping forging furnace:

1、Brief introduction of Stepping forging furnace

Stepping forging furnaceIt is a forging heating device using gas as fuel.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the main features are energy-efficient, Strong adaptability, energy-efficient, Easy to control and energy saving and environmental protection，widely used in petroleum, heat treatment, Household necessities, material, light industry and other fields，The overall structural design is relatively simple，it mainly includes Radiation chamber, combustor, Radiation chamber, ventilation system and recovery of waste heat。

Stepping forging furnace

2、Stepping forging furnace principle

Stepping forging furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Stepping forging furnace

3、Stepping forging furnace function

Stepping forging furnaceit has the functions of temper, Forging heating, normalizing, Casting heating and heat treatment，is a popular Stepping forging furnace，the product looks beautiful.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal melting and casting and so on，it is an ideal choice for customers to buy Stepping forging furnace。

Stepping forging furnace

4、Stepping forging furnace structure

The Stepping forging furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Stepping forging furnace

5、Stepping forging furnace HD picture

Stepping forging furnace HD factory map, all-round shooting, for our customers to visit.。

Stepping forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Stepping forging furnace characteristics

The Stepping forging furnace features are as follows:

1. Efficient heating

The Stepping forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Stepping forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Stepping forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Stepping forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Strong adaptability

The Stepping forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Stepping forging furnace

Stepping forging furnaceStable and reliable,Easy to maintain,Strong adaptability,energy-efficient,Strong adaptability，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。