Introduction to Multi tube bright annealing furnace, heating furnace advantages, characteristics and principles

Multi tube bright annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Multi tube bright annealing furnace

Multi tube bright annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Multi tube bright annealing furnace

2、Multi tube bright annealing furnace characteristics

The Multi tube bright annealing furnace features are as follows:

1. Strong adaptability

The Multi tube bright annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Multi tube bright annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Multi tube bright annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to control

The combustion system and ventilation system of the Multi tube bright annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Efficient heating

The Multi tube bright annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Multi tube bright annealing furnace

3、Functional advantages of Multi tube bright annealing furnace

Multi tube bright annealing furnaces have the following advantages.

1. Extend the service life of equipment

The Multi tube bright annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Multi tube bright annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Multiple fuel options

Although the Multi tube bright annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Wide application range

The Multi tube bright annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Extend the service life of equipment

The Multi tube bright annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Multi tube bright annealing furnace

4、Multi tube bright annealing furnace video detail

Speak directly with facts on the spot。

Multi tube bright annealing furnace

As you can see from the live video.，One-combustion energy saving Widely used inMetal forging heating,Metal tempering,Metal melting and casting,Energy conservation and environmental protection,Metal melting and casting and so on。

5、Multi tube bright annealing furnace application

Multi tube bright annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Multi tube bright annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Multi tube bright annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Multi tube bright annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi tube bright annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Multi tube bright annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Multi tube bright annealing furnace

6、Multi tube bright annealing furnace quotation

The Multi tube bright annealing furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Multi tube bright annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Multi tube bright annealing furnace price can meet the purchasing needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. mass discrepancy

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

4. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Multi tube bright annealing furnace has a higher cost performance.

5. Model specification

There are many specifications and models of Multi tube bright annealing furnace in the market now. Under normal circumstances, the price of large-sized Multi tube bright annealing furnace is definitely higher than that of small-sized Multi tube bright annealing furnace.

Multi tube bright annealing furnace

Multi tube bright annealing furnacethe product looks atmospheric.，the main features are Stable and reliable, Easy to maintain, Easy to control, Strong adaptability and energy-efficient。