What is a Heat treatment natural gas trolley furnace? Introduction to the principle of heating furnace structure

Heat treatment natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。

1、Brief introduction of Heat treatment natural gas trolley furnace

Heat treatment natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used inlight industry,Machinery manufacturing,shipping,electron,war industry and other industries，The structure is novel, special, advanced, reasonable and scientific.，structure mainly includes: ventilation system, furnace chamber, Radiation chamber, combustor, convection chamber and so on。

Heat treatment natural gas trolley furnace

2、Heat treatment natural gas trolley furnace structure

The Heat treatment natural gas trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Heat treatment natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Heat treatment natural gas trolley furnace

3、Introduction of advantages of Heat treatment natural gas trolley furnace

Heat treatment natural gas trolley furnaces have the following advantages.

1. Extend the service life of equipment

The Heat treatment natural gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Intelligent control

The Heat treatment natural gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Rapid temperature rise

The Heat treatment natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Improve product quality

Because the Heat treatment natural gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Efficient combustion

The Heat treatment natural gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Heat treatment natural gas trolley furnace

4、Heat treatment natural gas trolley furnace characteristics

The Heat treatment natural gas trolley furnace features are as follows:

1. Strong adaptability

The Heat treatment natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

The combustion system and ventilation system of the Heat treatment natural gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Efficient heating

The Heat treatment natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Heat treatment natural gas trolley furnace

5、Heat treatment natural gas trolley furnace HD picture real shot

High-definition pictures of reliable Heat treatment natural gas trolley furnace at a glance。

Heat treatment natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Heat treatment natural gas trolley furnaceIt has a wide range of uses, including Metal heat treatment, Metal forging heating, Energy conservation and environmental protection, Metal tempering and Metal melting and casting，it has the characteristics of Stable and reliable, energy saving and environmental protection, Easy to maintain, Easy to control and Strong adaptability。