What is a Regenerative trolley heating furnace? Introduction to the principle of Forging furnace structure

Regenerative trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Regenerative trolley heating furnace

Regenerative trolley heating furnaceIt is a forging heating device using gas as fuel.，Easy to maintain,energy saving and environmental protection,Stable and reliable,energy-efficient,energy saving and environmental protection，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，multifunctional, with functions such as Casting heating, hardening and tempering, quench, Casting heating and temper，be loved by our customers.。

Regenerative trolley heating furnace

2、Regenerative trolley heating furnace application

Regenerative trolley heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Regenerative trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Regenerative trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Regenerative trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative trolley heating furnace

3、Regenerative trolley heating furnace customer scene picture

HD picture of One-combustion energy saving Regenerative trolley heating furnace,energy-efficient。

Regenerative trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural characteristics of Regenerative trolley heating furnace

The Regenerative trolley heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Regenerative trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Regenerative trolley heating furnace

5、Regenerative trolley heating furnace function

Regenerative trolley heating furnaceit has the functions of Forging heating, anneal, normalizing, heat treatment and hardening and tempering，Structure consists of furnace chamber, convection chamber, ventilation system, combustor, ventilation system and so on，This Regenerative trolley heating furnaceSimple structure and reliable operation.，is a kind of Regenerative trolley heating furnace manufactured by One-combustion energy saving。

Regenerative trolley heating furnace

Regenerative trolley heating furnacethe product looks atmospheric.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。