Introduction to Regenerative trolley forging furnace, introduction to heating furnace function advantages and characteristics

Regenerative trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has a wide range of uses, including Metal melting and casting, Metal heat treatment, Improve production efficiency, Metal heat treatment and Metal tempering，customizable。

1、Brief introduction of Regenerative trolley forging furnace

Regenerative trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Regenerative trolley forging furnace

2、Regenerative trolley forging furnace introduction video

You can buy Regenerative trolley forging furnace according to your needs and show you Regenerative trolley forging furnace videos.。

Regenerative trolley forging furnace

As you can see from the live video.，One-combustion energy saving Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

3、Introduction of advantages of Regenerative trolley forging furnace

The advantages of Regenerative trolley forging furnace are as follows:

1. Uniform heating

The Regenerative trolley forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Rapid temperature rise

The Regenerative trolley forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Efficient combustion

The Regenerative trolley forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Extend the service life of equipment

The Regenerative trolley forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Regenerative trolley forging furnace

4、Advantages of Regenerative trolley forging furnace principle

Regenerative trolley forging furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Regenerative trolley forging furnace

5、Regenerative trolley forging furnace use

The purpose of Regenerative trolley forging furnace is introduced as follows:

1. Metal forging heating

The Regenerative trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Regenerative trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Regenerative trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative trolley forging furnace

6、Introduction of Regenerative trolley forging furnace characteristics

Regenerative trolley forging furnace has the following characteristics

1. Stable and reliable

The Regenerative trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Regenerative trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Efficient heating

The Regenerative trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Regenerative trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Regenerative trolley forging furnace

Regenerative trolley forging furnacewidely used in light industry, petroleum, heat treatment, Household necessities, aerospace and other fields，multifunctional, with functions such as Casting heating, quench, heat treatment, normalizing and anneal。