What is a Automated deep well furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Automated deep well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Automated deep well furnace

Automated deep well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a popular Automated deep well furnace，low in price。

Automated deep well furnace

2、Automated deep well furnace use

The purpose of Automated deep well furnace is introduced as follows:

1. Metal forging heating

The Automated deep well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Automated deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Automated deep well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Automated deep well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Automated deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automated deep well furnace

3、Introduction of Automated deep well furnace characteristics

Automated deep well furnace has the following characteristics

1. Stable and reliable

The Automated deep well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Automated deep well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Automated deep well furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Automated deep well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Automated deep well furnace

4、Automated deep well furnace field real shot

Haide Automated deep well furnace manufacturing factory。

Automated deep well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Automated deep well furnace performance advantage

The advantages of Automated deep well furnace are as follows:

1. Wide application range

The Automated deep well furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Extend the service life of equipment

The Automated deep well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Intelligent control

The Automated deep well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Automated deep well furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Efficient combustion

The Automated deep well furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Automated deep well furnace

6、How much is the Automated deep well furnace?

The Automated deep well furnace price is introduced as follows:

1. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. manufacturing cost

When the Automated deep well furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

3. Reasonable sales model

One-combustion energy saving Automated deep well furnace manufacturer is a strong and professional factory, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Automated deep well furnace price is also low.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. quality factor

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

Automated deep well furnace

Automated deep well furnaceusually used in pharmacy, material, heat treatment, war industry, shipping and other fields，It is a forging heating device using gas as fuel.。