Introduction to High temperature and low dust SCR denitrification equipment, advantages, characteristics and principles of SCR flue gas denitrification

High temperature and low dust SCR denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.。The following is to introduce the High temperature and low dust SCR denitrification equipment:

1、Brief introduction of High temperature and low dust SCR denitrification equipment

High temperature and low dust SCR denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it mainly includes Flue gas mixing and distribution system, control system, Catalyst reactor, Temperature control and monitoring system and Catalyst supply system。

High temperature and low dust SCR denitrification equipment

2、Advantages of High temperature and low dust SCR denitrification equipment principle

High temperature and low dust SCR denitrification equipmentat the start of the operation,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the product looks atmospheric.，Commonly used inMeet the requirements of environmental protection,Promote sustainable development,Improve product quality,environmental protection,Improve product quality and so on，is carefully developed by One-combustion energy saving combined with advanced technology。

High temperature and low dust SCR denitrification equipment

3、High temperature and low dust SCR denitrification equipment work site real shot

High temperature and low dust SCR denitrification equipment complete specifications and models, the product looks beautiful.。

High temperature and low dust SCR denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、High temperature and low dust SCR denitrification equipment performance advantage

The advantages of High temperature and low dust SCR denitrification equipment are as follows:

1. Wide applicability

High temperature and low dust SCR denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the High temperature and low dust SCR denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the High temperature and low dust SCR denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the High temperature and low dust SCR denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of High temperature and low dust SCR denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, High temperature and low dust SCR denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the High temperature and low dust SCR denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Intelligent control and convenience of operation

The High temperature and low dust SCR denitrification equipment has gradually realized intelligent control. By integrating advanced control system and sensor technology, the High temperature and low dust SCR denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

High temperature and low dust SCR denitrification equipment

5、High temperature and low dust SCR denitrification equipment use

High temperature and low dust SCR denitrification equipmentIt is a product series that integrates Meet the requirements of environmental protection, environmental protection, Flue gas denitrification, Promote sustainable development and Improve product quality，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the High temperature and low dust SCR denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The High temperature and low dust SCR denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the High temperature and low dust SCR denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the High temperature and low dust SCR denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the High temperature and low dust SCR denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the High temperature and low dust SCR denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，multifunctional, with functions such as environmental protection, Improve energy efficiency, Improve working conditions, Promote sustainable development and environmental protection。

High temperature and low dust SCR denitrification equipment

6、How much is the High temperature and low dust SCR denitrification equipment?

The High temperature and low dust SCR denitrification equipment price is introduced as follows:

1. model

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

2. Reasonable sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of High temperature and low dust SCR denitrification equipment is low.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

5. Manufacturer's strength

Our factory is a direct selling manufacturer of High temperature and low dust SCR denitrification equipment, with independent production and processing facilities, few circulation links and low circulation cost.

High temperature and low dust SCR denitrification equipment

High temperature and low dust SCR denitrification equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it has the functions of Improve working conditions, environmental protection, Improve energy efficiency, Improve working conditions and Promote sustainable development，the product looks atmospheric.。