Introduction to Low temperature catalyst denitrification equipment and SCR flue gas denitrification structure principle

Low temperature catalyst denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，widely used in Gas power plant, coal-fired power station, metallurgy, metallurgy, building materials and other fields，the advantage is The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalyst denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalyst denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalyst denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，the product looks atmospheric.，Mainly used forImprove product quality,environmental protection,Meet the requirements of environmental protection,Flue gas denitrification andPromote sustainable development。

1、Brief introduction of Low temperature catalyst denitrification equipment

Low temperature catalyst denitrification equipmentthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，is designed by One-combustion energy saving with advanced technology。

Low temperature catalyst denitrification equipment

2、Low temperature catalyst denitrification equipment function

Low temperature catalyst denitrification equipmentit has the functions of Improve working conditions, Promote sustainable development, environmental protection, Promote sustainable development and environmental protection，the product looks beautiful.，Mature and stable technology,Efficient denitration,Promote sustainable development,Stable operation,Strong adaptability，the advantage is Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalyst denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，is a Low temperature catalyst denitrification equipment。

Low temperature catalyst denitrification equipment

3、Low temperature catalyst denitrification equipment structure composition

The Low temperature catalyst denitrification equipment structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

3. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

4. control system

The whole Low temperature catalyst denitrification equipment is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

5. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

Low temperature catalyst denitrification equipment

4、Low temperature catalyst denitrification equipment field real shot

The following is the live video of Low temperature catalyst denitrification equipment designed and produced by One-combustion energy saving for users, from which we can see the The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalyst denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalyst denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy. of One-combustion energy savingLow temperature catalyst denitrification equipment.。

Low temperature catalyst denitrification equipment

As you can see from the live video.，One-combustion energy saving the main structure includes Flue gas mixing and distribution system, Catalyst reactor, Catalyst supply system, control system, Temperature control and monitoring system and so on，Low temperature catalyst denitrification equipmentThe overall structural design is simple and novel.。

5、How much is the Low temperature catalyst denitrification equipment?

The Low temperature catalyst denitrification equipment price is introduced as follows:

1. Different regions

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Low temperature catalyst denitrification equipment price and service can meet the actual needs of customers.

3. raw material

The quality of material selection is one of the main factors that directly affect the Low temperature catalyst denitrification equipment. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. Manufacturer scale

Our company's expected profit value of Low temperature catalyst denitrification equipment is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Low temperature catalyst denitrification equipment is relatively low.

5. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Low temperature catalyst denitrification equipment

6、One-combustion energy saving company discount

Low temperature catalyst denitrification equipment is a new type of SCR flue gas denitrification introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for cement plant and other industries. Now consult One-combustion energy savingproduce的Low temperature catalyst denitrification equipment, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Low temperature catalyst denitrification equipmentmultifunctional, with functions such as Improve energy efficiency, Improve working conditions, Promote sustainable development, Improve working conditions and environmental protection，delective catalytic reduction technology is an efficient flue gas denitrification technology.。