Brief introduction of Hot rolling roller heat treatment furnace

Hot rolling roller heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Commonly used inMetal tempering,Metal forging heating,Improve production efficiency,Metal heat treatment,Metal melting and casting and so on，it is an ideal choice for customers to buy Hot rolling roller heat treatment furnace。The following is to introduce the Hot rolling roller heat treatment furnace:

1、Brief introduction of Hot rolling roller heat treatment furnace

Hot rolling roller heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it can be used in electron, automobile, building materials, heat treatment, light industry and other industries。

Hot rolling roller heat treatment furnace

2、Hot rolling roller heat treatment furnace application

Hot rolling roller heat treatment furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Hot rolling roller heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Hot rolling roller heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Hot rolling roller heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, Hot rolling roller heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Hot rolling roller heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Hot rolling roller heat treatment furnace

3、Structural characteristics of Hot rolling roller heat treatment furnace

The Hot rolling roller heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Hot rolling roller heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Hot rolling roller heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Hot rolling roller heat treatment furnace

4、Working principle of Hot rolling roller heat treatment furnace

Hot rolling roller heat treatment furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is mostly used in Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting, Metal tempering, Metal heat treatment and so on，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the product looks atmospheric.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Hot rolling roller heat treatment furnace

5、How much is the Hot rolling roller heat treatment furnace?

The Hot rolling roller heat treatment furnace price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. company strength

The nature of the manufacturer can also greatly affect the price of the Hot rolling roller heat treatment furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. Different regions

One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Hot rolling roller heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Hot rolling roller heat treatment furnace price can meet the purchasing needs of customers.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Hot rolling roller heat treatment furnace

6、company strength

The company has many years of Hot rolling roller heat treatment furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Hot rolling roller heat treatment furnaceIt is a product series that integrates Metal tempering, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency and Metal heat treatment，is a common Hot rolling roller heat treatment furnace，it is widely used in war industry, automobile, shipping, heat treatment and chemical industry。