Rotary trolley heating furnace detailed introduction

Rotary trolley heating furnaceIt is a forging heating device using gas as fuel.，It has the functions of Metal forging heating, Metal heat treatment, Energy conservation and environmental protection, Metal tempering and Metal melting and casting，Simple structure and reliable operation.，the main structure includes Radiation chamber, combustor, ventilation system, ventilation system, recovery of waste heat and so on。

1、Brief introduction of Rotary trolley heating furnace

Rotary trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used inelectron,petroleum,automobile,petroleum,light industry and other industries，it is an ideal choice for customers to buy Rotary trolley heating furnace。

Rotary trolley heating furnace

2、Rotary trolley heating furnace use

The purpose of Rotary trolley heating furnace is introduced as follows:

1. Improve production efficiency

The Rotary trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Rotary trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Rotary trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Rotary trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Rotary trolley heating furnace

3、Rotary trolley heating furnace performance advantage

Rotary trolley heating furnaces have the following advantages.

1. Intelligent control

The Rotary trolley heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Multiple fuel options

Although the Rotary trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rotary trolley heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Rapid temperature rise

The Rotary trolley heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Extend the service life of equipment

The Rotary trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Rotary trolley heating furnace

4、Rotary trolley heating furnace principle

Rotary trolley heating furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，generally, it is composed of convection chamber, ventilation system, ventilation system, recovery of waste heat, furnace chamber and other major components，Rotary trolley heating furnaceThe overall structural design is simple, diverse and beautiful.，multifunctional, with functions such as temper, hardening and tempering, Casting heating, Forging heating and quench。

Rotary trolley heating furnace

5、Structural characteristics of Rotary trolley heating furnace

The Rotary trolley heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. Radiation chamber

The heat load of the main place for Rotary trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Rotary trolley heating furnace

6、One-combustion energy saving after-sales service

Rotary trolley heating furnace after-sales service is perfect, and a complete after-sales service system is established, which can solve customers' problems anytime and anywhere. In addition, our company promises that all customers who purchase this product can enjoy a full set of pre-sale, in-sale and after-sales services.。

One-combustion energy saving

Rotary trolley heating furnacethe advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，the main structure includes Radiation chamber, convection chamber, furnace chamber, combustor, Radiation chamber and so on。