What is a Dual station annealing and heating furnace?

Dual station annealing and heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a Dual station annealing and heating furnace，is designed by One-combustion energy saving with advanced technology。The following is to introduce the Dual station annealing and heating furnace:

1、Brief introduction of Dual station annealing and heating furnace

Dual station annealing and heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The price is more affordable，modern technology。

Dual station annealing and heating furnace

2、Dual station annealing and heating furnace function

Dual station annealing and heating furnacemultifunctional, with functions such as quench, hardening and tempering, quench, Casting heating and temper，is a kind of high quality and low price Dual station annealing and heating furnace。

Dual station annealing and heating furnace

3、Dual station annealing and heating furnace structure

The Dual station annealing and heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Dual station annealing and heating furnace

4、Dual station annealing and heating furnace function

Dual station annealing and heating furnaceit has the functions of anneal, heat treatment, normalizing, Forging heating and hardening and tempering，usually used in heat treatment, building materials, surface treatment, pharmacy, war industry and other fields，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular Dual station annealing and heating furnace。

Dual station annealing and heating furnace

5、Dual station annealing and heating furnace advantage

The advantages of Dual station annealing and heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Intelligent control

The Dual station annealing and heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Multiple fuel options

Although the Dual station annealing and heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Efficient combustion

The Dual station annealing and heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Uniform heating

The Dual station annealing and heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Dual station annealing and heating furnace

Dual station annealing and heating furnacefeatures include Stable and reliable, Easy to control, energy-efficient, Easy to maintain and energy saving and environmental protection，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.。