What is a Medium carbon steel heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Medium carbon steel heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Medium carbon steel heating furnace。

1、Brief introduction of Medium carbon steel heating furnace

Medium carbon steel heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it can be used in shipping, surface treatment, chemical industry, heat treatment, metallurgy and other industries，it has the functions of temper, Forging heating, anneal, normalizing and hardening and tempering，The price is more affordable，be of high quality。

Medium carbon steel heating furnace

2、Medium carbon steel heating furnace performance advantage

The advantages of Medium carbon steel heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Medium carbon steel heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the Medium carbon steel heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The Medium carbon steel heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. easy to operate

The operation interface of the Medium carbon steel heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Medium carbon steel heating furnace

3、Medium carbon steel heating furnace use

The purpose of Medium carbon steel heating furnace is introduced as follows:

1. Metal forging heating

The Medium carbon steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Medium carbon steel heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Medium carbon steel heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Medium carbon steel heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Medium carbon steel heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Medium carbon steel heating furnace

4、Working principle of Medium carbon steel heating furnace

Medium carbon steel heating furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a common Medium carbon steel heating furnace，support customization。

Medium carbon steel heating furnace

5、How much is the Medium carbon steel heating furnace?

The Medium carbon steel heating furnace price is introduced as follows:

1. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Shandong(Province) has convenient transportation, which provides a good convenience for the transportation of Medium carbon steel heating furnace.

2. Product configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Medium carbon steel heating furnace price and service can meet the actual needs of customers.

4. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Medium carbon steel heating furnace is low.

5. Brand strength

At present, there are various brands of Medium carbon steel heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Medium carbon steel heating furnace are different.

Medium carbon steel heating furnace

6、One-combustion energy saving service

Perfect service: In order to improve the service quality and improve the service level, One-combustion energy saving has set up a sound quality management department and a professional after-sales service team, so as to be highly responsible for customers and avoid their worries in the use process.。

One-combustion energy saving

Medium carbon steel heating furnaceusually used in automobile, light industry, petroleum, aerospace, Machinery manufacturing and other fields，the main features are Stable and reliable, Strong adaptability, Easy to maintain, energy saving and environmental protection and energy-efficient。