What is a Isothermal normalizing heat treatment furnace? Introduction to the advantages and characteristics of Forging furnace functions

Isothermal normalizing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Isothermal normalizing heat treatment furnace

Isothermal normalizing heat treatment furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Structure consists of furnace chamber, ventilation system, convection chamber, ventilation system, combustor and so on，This Isothermal normalizing heat treatment furnaceThe structural design is more advanced and reasonable.，multifunctional, with functions such as temper, heat treatment, Casting heating, hardening and tempering and heat treatment，was developed and designed by One-combustion energy saving。

Isothermal normalizing heat treatment furnace

2、Structural characteristics of Isothermal normalizing heat treatment furnace

The Isothermal normalizing heat treatment furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Isothermal normalizing heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Isothermal normalizing heat treatment furnace

3、Isothermal normalizing heat treatment furnace HD real shot

You can buy Isothermal normalizing heat treatment furnace according to your needs and show you product videos.。

Isothermal normalizing heat treatment furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

4、Isothermal normalizing heat treatment furnace characteristics

The Isothermal normalizing heat treatment furnace features are as follows:

1. Efficient heating

The Isothermal normalizing heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Easy to control

The combustion system and ventilation system of the Isothermal normalizing heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Isothermal normalizing heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Isothermal normalizing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Isothermal normalizing heat treatment furnace

5、Isothermal normalizing heat treatment furnace advantage

The advantages of Isothermal normalizing heat treatment furnace are as follows:

1. Wide application range

The Isothermal normalizing heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Intelligent control

The Isothermal normalizing heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Isothermal normalizing heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Rapid temperature rise

The Isothermal normalizing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Improve product quality

Because the Isothermal normalizing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Isothermal normalizing heat treatment furnace

6、How much is the Isothermal normalizing heat treatment furnace?

The Isothermal normalizing heat treatment furnace price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Isothermal normalizing heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Isothermal normalizing heat treatment furnace price can meet the purchasing needs of customers.

2. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Isothermal normalizing heat treatment furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Isothermal normalizing heat treatment furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Isothermal normalizing heat treatment furnace is low.

4. company strength

There are many Isothermal normalizing heat treatment furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

5. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Isothermal normalizing heat treatment furnace

Isothermal normalizing heat treatment furnaceis a popular Isothermal normalizing heat treatment furnace，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。