What is a Double ended annealing furnace? forging furnace specifications, models, and parameters

Double ended annealing furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Double ended annealing furnace

Double ended annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Double ended annealing furnace

2、Double ended annealing furnace customer scene picture

Details of One-combustion energy saving Double ended annealing furnace,the product looks atmospheric.。

Double ended annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Double ended annealing furnace application

Double ended annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Double ended annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Double ended annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Double ended annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Double ended annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Double ended annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double ended annealing furnace

4、Structural advantages of Double ended annealing furnace

The Double ended annealing furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Double ended annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Double ended annealing furnace

5、Double ended annealing furnace price consultation

The Double ended annealing furnace price is introduced as follows:

1. market factors

In order to build their own brands, some manufacturers deliberately reduce the price of Double ended annealing furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. Low cost of raw materials

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

Double ended annealing furnace

6、One-combustion energy saving after-sales service

One-combustion energy saving has perfect and reasonable after-sales service, which can solve customers' problems in a short time and reduce customers' losses. One-combustion energy saving can provide strong protection for customers in the later stage.。

One-combustion energy saving

Double ended annealing furnaceit mainly includes recovery of waste heat, ventilation system, furnace chamber, convection chamber and ventilation system，multifunctional, with functions such as hardening and tempering, Forging heating, normalizing, Forging heating and heat treatment。