Introduction to Trolley mold shell heating furnace, introduction to forging furnace function advantages and characteristics

Trolley mold shell heating furnaceIt is a forging heating device using gas as fuel.，The overall structural design is simple and novel.，it is mainly composed of Radiation chamber, furnace chamber, convection chamber, ventilation system and furnace chamber。

1、Brief introduction of Trolley mold shell heating furnace

Trolley mold shell heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Trolley mold shell heating furnace

2、Trolley mold shell heating furnace performance advantage

Trolley mold shell heating furnaces have the following advantages.

1. Extend the service life of equipment

The Trolley mold shell heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Trolley mold shell heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Improve product quality

Because the Trolley mold shell heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Wide application range

The Trolley mold shell heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Intelligent control

The Trolley mold shell heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Trolley mold shell heating furnace

3、Trolley mold shell heating furnace structure composition

The Trolley mold shell heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Trolley mold shell heating furnace

4、Working principle of Trolley mold shell heating furnace

Trolley mold shell heating furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main structure includes ventilation system, furnace chamber, recovery of waste heat, combustor, ventilation system and so on，is carefully developed by One-combustion energy saving combined with advanced technology。

Trolley mold shell heating furnace

5、Trolley mold shell heating furnace application

Trolley mold shell heating furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Trolley mold shell heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Trolley mold shell heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Trolley mold shell heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Trolley mold shell heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Trolley mold shell heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Trolley mold shell heating furnace

6、How much is the Trolley mold shell heating furnace?

The Trolley mold shell heating furnace price is introduced as follows:

1. product model

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Trolley mold shell heating furnace, which have different models and different performances. Therefore, these are all factors that affect the price change of Trolley mold shell heating furnace.

2. market competition

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Trolley mold shell heating furnace will be very high.

3. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Trolley mold shell heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Trolley mold shell heating furnace price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Trolley mold shell heating furnace

Trolley mold shell heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is usually composed of ventilation system, combustor, Radiation chamber, recovery of waste heat and convection chamber，This productThe overall structural design is simple, diverse and beautiful.。