Introduction to Regenerative natural gas chain furnace, advantages, characteristics and principles of Forging furnace

Regenerative natural gas chain furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Regenerative natural gas chain furnace

Regenerative natural gas chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It has a wide range of uses, and is often used inMetal heat treatment,Metal forging heating,Improve production efficiency,Energy conservation and environmental protection,Metal tempering and so on。

Regenerative natural gas chain furnace

2、Introduction of Regenerative natural gas chain furnace characteristics

Regenerative natural gas chain furnace has the following characteristics

1. Efficient heating

The Regenerative natural gas chain furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Regenerative natural gas chain furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Regenerative natural gas chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Regenerative natural gas chain furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Regenerative natural gas chain furnace

3、Physical picture of Regenerative natural gas chain furnace

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Regenerative natural gas chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Regenerative natural gas chain furnace structure composition

The Regenerative natural gas chain furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Regenerative natural gas chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Regenerative natural gas chain furnace

5、Working principle of Regenerative natural gas chain furnace

Regenerative natural gas chain furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。

Regenerative natural gas chain furnace

6、Regenerative natural gas chain furnace price advantage

The Regenerative natural gas chain furnace price is introduced as follows:

1. cost of production

When the Regenerative natural gas chain furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. market factors

If there is a large demand for Regenerative natural gas chain furnace in the market, the price of Regenerative natural gas chain furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

5. Different regions

The price of Regenerative natural gas chain furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a large domestic Regenerative natural gas chain furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Regenerative natural gas chain furnace price positioning more reasonable, low-cost and economical.

Regenerative natural gas chain furnace

Regenerative natural gas chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used inautomobile,aerospace,surface treatment,shipping,Machinery manufacturing and other industries。