Introduction to Dual car high-temperature annealing furnace, advantages, characteristics and principles of forging furnace

Dual car high-temperature annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Mainly used forMetal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Metal heat treatment andMetal melting and casting，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Dual car high-temperature annealing furnace:

1、Brief introduction of Dual car high-temperature annealing furnace

Dual car high-temperature annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Dual car high-temperature annealing furnace。

Dual car high-temperature annealing furnace

2、Dual car high-temperature annealing furnace introduction video

Speak directly with facts on the spot。

Dual car high-temperature annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It has a wide range of uses, and is often used inImprove production efficiency,Metal forging heating,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on。

3、Dual car high-temperature annealing furnace principle

Dual car high-temperature annealing furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is relatively simple and compact.，structure mainly includes: recovery of waste heat, Radiation chamber, combustor, ventilation system, furnace chamber and so on，be loved by our customers.。

Dual car high-temperature annealing furnace

4、Dual car high-temperature annealing furnace characteristics

The Dual car high-temperature annealing furnace features are as follows:

1. Strong adaptability

The Dual car high-temperature annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Efficient heating

The Dual car high-temperature annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Dual car high-temperature annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Dual car high-temperature annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Dual car high-temperature annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Dual car high-temperature annealing furnace

5、Dual car high-temperature annealing furnace price concessions

The Dual car high-temperature annealing furnace price is introduced as follows:

1. regional advantages

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

2. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. company strength

There are many manufacturers of products in Jinan, Shandong province, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Dual car high-temperature annealing furnace is naturally different.

4. product quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Dual car high-temperature annealing furnace price and service can meet the actual needs of customers.

Dual car high-temperature annealing furnace

6、High-definition map of One-combustion energy saving workshop

The finished products of the Dual car high-temperature annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Dual car high-temperature annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Dual car high-temperature annealing furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it can be used in war industry, electron, shipping, aerospace, pharmacy and other industries，is a Dual car high-temperature annealing furnace。